dex logodex logodex logodex logo
  • Home
  • Knowledge Base
    • AXON Series
    • Davicom Cortex Series
    • DV-200 Series
    • NEURO Series
    • Sensors
    • Software
    • Expansions & Accessories
    • Workspaces
    • Glossary
    • Discontinued Davicom Antennas & Filters
  • Blog
  • FAQs
    • Andrew’s Advice Archive
    • Davicom Cortex FAQ
    • DV-200 FAQ
    • DavLink FAQ
    • Additional FAQ
  • Documents
    • Manuals & Guides
    • Datasheets
    • Software & Firmware
    • Workspaces & Configurations
  • Events & Webinars
    • Webinars
    • DEX Breakfast
    • Alt-IWCE 2020 Webinar Week
    • Alt-NAB 2020 Webinar Week
  • Contact
    • Contact Us
    • Returns and RMA form
    • Customer Satisfaction Surveys
  • Log In
✕

Knowledge Base

  • Advanced Articles
    • Activity Monitoring Menu Explained (Davicom Cortex series)
    • Creating limited-rights users with the Custom Level Editor
    • Hardware Monitoring Menu Explained (Davicom Cortex 360)
    • How to Connect the Davicom ACPM-1 (WattNode Pulse) to the Davicom Cortex
    • Serial Port Configuration (Davicom Cortex 360)
    • Virtual Logic Gates (VLG) Menu Explained (Davicom Cortex series)
  • AXON Series
    • AXON Connections and Switch Configurations
    • Axon Series Quick Start Guide
    • Axon Series SNMP MIB
    • AXON/NEURO as a Modbus Unit
    • AXON/NEURO Menus and General Navigation Guidelines
    • AXON/NEURO Specifications
    • Davicom Input/Output/Flag/System Identifier Names
    • Home Page Explained (AXON/NEURO Series)
    • Initial Log-in and Network Setup (AXON/NEURO Series)
    • Inputs (AXON/NEURO Series)
    • Logs (AXON/NEURO Series)
    • Outputs (AXON/NEURO Series)
    • System Configuration (AXON/NEURO Series)
    • What is an AXON?
  • Davicom Cortex Series
    • AC Power Fail Menu Explained (Davicom Cortex series)
    • Activating Software Options on Davicom Cortex 360/320 Units
    • Activity Monitoring Menu Explained (Davicom Cortex series)
    • Administration Menu Explained (Davicom Cortex series)
    • Alarm Call Lists Menu Explained (Davicom Cortex series)
    • Alarm Parameters Menu Explained (Davicom Cortex series)
    • Configuration and Programming Settings (Davicom Cortex series)
    • Connection and initial setup of MEXM devices with a Davicom Cortex unit
    • Connections List Explained (Davicom Cortex Series)
    • Creating limited-rights users with the Custom Level Editor
    • Custom Log Setup explained (Davicom Cortex Series)
    • Date, Time and Location Menu Explained (Davicom Cortex series)
    • Davicom Cortex 320 Factory Reset Procedure
    • Davicom Cortex 320 Firmware Upgrade and Rollback Procedures
    • Davicom Cortex 320 Rescue Procedure
    • Davicom Cortex 320/360 Specifications
    • Davicom Cortex 360 Factory Reset Procedure
    • Davicom Cortex 360 Firmware Upgrade and Rollback Procedures
    • Davicom Cortex 360 Rescue Procedure
    • Davicom Cortex 360 Specifications
    • Davicom Cortex DTMF Telephone Commands
    • Davicom Cortex Panel (Tab) Properties Explained
    • Davicom Cortex Series RTC Battery
    • Davicom Cortex Series System Menu
    • Davicom Cortex SNMP SET (Write) example on an IP-enabled Power Distribution Unit (PDU) (CyberPower)
    • Davicom Cortex360/Davicom Cortex320 Pinouts
    • Davicom Input/Output/Flag/System Identifier Names
    • DavNet Alarms and Logs from Your Network of Remote Sites
    • Enabling and Configuring Davicom Cortex Inputs
    • External Voltage Detection Status Input (Wet Contact Mode) (Davicom Cortex 360)
    • Front and Rear Panel Descriptions (Davicom Cortex 320)
    • Front and Rear Panel Descriptions (Davicom Cortex 360)
    • Generic Inputs Menus Explained (Davicom Cortex series)
    • Generic Outputs Menus Explained (Davicom Cortex series)
    • Gmail Security Changes on May 30th 2022
    • Graphic edition menu explained (Davicom Cortex Series)
    • Guide: Configuring Unit-to-Unit Commands Between NEURO and Davicom CORTEX Using RS-232/Serial
    • Hardware Monitoring Menu Explained (Davicom Cortex 360)
    • How to Assign a Specific Davicom Cortex Workspace to a User
    • How to change the DavLink 6 default Workspace
    • How to Configure a Metering Input (Davicom Cortex 360)
    • How to Configure a Status Input (Davicom Cortex series)
    • How to Configure an Alarm Call List (Davicom Cortex series)
    • How to Configure and Control a Physical Relay (Davicom Cortex series)
    • How to Configure Log and Status Report Information (Davicom Cortex series)
    • How to Connect Physical I/O to the Davicom Cortex 320
    • How to Connect Physical I/O to the Davicom Cortex 360
    • How to Connect the Davicom ACPM-1 (WattNode Pulse) to the Davicom Cortex
    • How to Connect to the Davicom Cortex Unit
    • How to Control Relays with Davicom Logic (Davicom Cortex series)
    • How to Create and Edit a Workspace (Davicom Cortex series)
    • How to Delete Workspaces from a Davicom Cortex
    • How to do a Factory Reset (Davicom Cortex 320)
    • How to do a Factory Reset (Davicom Cortex 360)
    • How to Install a Certificate in your Web Browser (Davicom Cortex series)
    • How To Install a Let’s Encrypt security certificate ™
    • How to Install a Modem in a Davicom Cortex Unit
    • How to Load a Workspace (Davicom Cortex series)
    • How to Open and Merge Davicom Cortex Workspaces
    • How to Perform a Firmware Rollback (Davicom Cortex 360)
    • How to Rename a Davicom Cortex Workspace Tab
    • How to rename Workspaces from within a Davicom Cortex
    • How to Retrieve Workspaces from a Davicom Cortex
    • How to Save a Workspace (Davicom Cortex series)
    • How to Set the Internal Jumpers and DIP Switches (Davicom Cortex 320)
    • How to Set the Internal Jumpers and DIP Switches (Davicom Cortex 360)
    • How to Set-Up the Davicom Cortex Unit
    • How to setup a Davicom Cortex320 Versatile Metering Input as a Digital Input
    • How to Upgrade Davicom Cortex 360 Firmware
    • How to upload a Workspace into a Davicom Cortex
    • How to use the Davicom Cortex Up & Down Counters (Davicom Cortex Series)
    • Introduction to Davicom Cortex Meter Edition and Creation
    • Introduction to Workspace Creation, Edition and Saving (Davicom Cortex Series)
    • IP Configuration Menu Explained (Davicom Cortex series)
    • Metering Inputs Menu Explained (Davicom Cortex series)
    • Monitoring a Repeater Using BPS with a Davicom CORTEX Unit
    • Physical Relays Menu Explained (Davicom Cortex series)
    • Pings Menu Explained (Davicom Cortex series)
    • Playing Pre-Recorded Audio Messages Over a Radio (Davicom Cortex Series)
    • Quick-Access Menu for the Davicom Cortex 360 Inputs & Outputs
    • Relay Operating Modes (Davicom Cortex series)
    • Serial Port Configuration (Davicom Cortex 360)
    • Setting up and using the Custom Log (Davicom Cortex Series)
    • Setting-up an ADAM 6017, 8-Ch Isolated Analog Input Modbus TCP Module on a Davicom Cortex
    • Status Inputs Menu Explained (Davicom Cortex series)
    • System Status View Menu Explained (Davicom Cortex series)
    • Understanding the number of Modbus I/O’s useable with different Davicom units
    • User Interface and Menus (Davicom Cortex series)
    • Users Menu Explained (Davicom Cortex series)
    • Using the Built-In Chat Communications Feature
    • Virtual Logic Gates (VLG) Menu Explained (Davicom Cortex series)
    • Virtual Relays Menu Explained (Davicom Cortex series)
    • What are the Different Action Types? (Davicom Cortex series)
    • What do the Physical Relay Colours Mean? (Davicom Cortex series)
    • What is a Remote Management System?
    • What is a Workspace? (Davicom Cortex series)
    • What is the Difference Between the Workspace File and the Configuration File (Davicom Cortex series)
    • Why and How to Resize Davicom Cortex Workspaces
    • Workspaces Menu Explained (Davicom Cortex series)
  • DV-200 Series
    • Alarm Calls (DV-200)
    • Ancillary Equipment Network Ping (DV-200)
    • Davicom Input/Output/Flag/System Identifier Names
    • DV-200 2L76 3-Volt RAM Battery Hack
    • DV-200 unit versus DavLink Software
    • Front and Rear Panel Descriptions (DV-208/216)
    • Front and Rear Panel Descriptions (DV-Micro)
    • Front and Rear Panel Descriptions (DV-Mini)
    • Gmail Security Changes on May 30th 2022
    • How To Acknowledge Alarm Calls (DV-200)
    • How to Connect to a DV-200 Unit
    • How to Control a Relay in DavLink Using a Mouse (DV-200)
    • How to Easily Send SMS Alarm Messages from Your DV-200 Unit to Your Smartphone
    • How to Know When a DV-200 Unit Got its Alarm-Calls Feature Disabled
    • How to Monitor Your Tower Light Status (DV-200)
    • How to Resize DavLink Workspaces (DV-200)
    • How to Send Alarms to More Than One DavNet
    • How to Set-Up a DV-200 Unit
    • How to Upgrade DV-200 Firmware
    • How to use the Power Fail Input of a DV-200 unit
    • How Your DV-200 Unit can Tell You if Its RAM Battery is Getting Low
    • Input/Output Capacity (DV-200)
    • Installation and Setup of the BPS1050/BPS5095 with a Davicom DV-200 Unit (TB-034)
    • Installing DavLink Software and Davicom Firmware & Utilities
    • IP Audio Streaming (DV-200)
    • Metering Inputs (DV-200)
    • Reach-Through Serial Ports (DV-200)
    • Relays (DV-200)
    • Site Information (DV-200)
    • Status Inputs (DV-200)
    • Timers (DV-200)
    • Touch-tone Telephone Commands (DV-200)
    • Understanding Inputs/Outputs Configuration Menus (DV-200)
    • Understanding the number of Modbus I/O’s useable with different Davicom units
    • Unit-to-Unit Commands (DV-200)
    • Upgrading the Davicom DV-200 Firmware Using the Alternate Method
    • User Management (DV-200)
    • Virtual Logic Gates (DV-200)
    • What are the DV-200 Front Panel LEDs Saying
    • What is a Remote Management System?
  • Expansions & Accessories
    • About the DADS-1
    • About the FMBM
    • About the MEXM Davicom Expansion Module
    • Configuring the Davicom Unit to Work With a MEXM
    • Connecting an ACPM-1 (WattNode) to a Davicom MEXM
    • Connection and initial setup of MEXM devices with a Davicom Cortex unit
    • DADS-1 Operation
    • Detailed Input/Output Pinout for MEXM-1
    • Detailed Input/Output Pinout for MEXM-2
    • DTPI Installation and Operation
    • DTPI Toolbox Configuration and Use
    • FMBM Operation
    • Front and Rear Panel Descriptions (MEXM)
    • Hardware Description, Installation and Connections (DADS-1)
    • Hardware Description, Installation and Connections (FMBM)
    • Hardware Settings (DADS-1)
    • How to Install the Digital Audio AES Output Option (FMBM)
    • How to Upgrade FMBM Firmware
    • How to Upgrade MEXM Firmware (DV-200 & DavLink)
    • Local Operation With a PC (DADS-1)
    • Local Operation with Front-Panel Display & Buttons (DADS-1)
    • Metering Inputs Configuration (MEXM)
    • MEXM Communications Modes
    • MEXM Mnemonic to Use With Davlink / Davicom Web Interface
    • MEXM Touch-Tone Telephone Commands
    • MEXM-1 I/O Modbus Addresses
    • MEXM-2 I/O Modbus Addresses
    • Operation Settings & Adjustments (FMBM)
    • Power Supply (MEXM)
    • Recycling your WEEE compliant MEXM unit (EC only)
    • Relay/Open-Collector Outputs Configuration (MEXM)
    • Remote Operation Via Rear-Panel I/Os (DADS-1)
    • Remote Operation Via the USB Port (DADS-1)
    • Restoring the Factory default Parameters (MEXM)
    • Setting Up and Connecting MEXM Units in RTU Mode
    • Setting Up and Connecting MEXM Units in TCP Mode
    • Software (DADS-1)
    • Software (FMBM)
    • Status Inputs Configuration (MEXM)
    • Temperature Probe Interface (DTPI) Specifications
    • Understanding the number of Modbus I/O’s useable with different Davicom units
  • General Support
    • Gmail Security Changes on May 30th 2022
    • How To Install a Let’s Encrypt security certificate ™
  • NEURO Series
    • AXON/NEURO as a Modbus Unit
    • AXON/NEURO Menus and General Navigation Guidelines
    • AXON/NEURO Specifications
    • Davicom Input/Output/Flag/System Identifier Names
    • Designing NEURO Commands Over Serial
    • Guide: Configuring Unit-to-Unit Commands Between NEURO and Davicom CORTEX Using RS-232/Serial
    • Home Page Explained (AXON/NEURO Series)
    • How to Install Extra NIO Cards into an Existing NEURO Unit
    • I/O board Identification in Stand-Alone mode for NEURO units
    • Initial Log-in and Network Setup (AXON/NEURO Series)
    • Inputs (AXON/NEURO Series)
    • Logs (AXON/NEURO Series)
    • Outputs (AXON/NEURO Series)
    • System Configuration (AXON/NEURO Series)
    • What is a NEURO?
  • Popular Articles
    • How to Connect to the Davicom Cortex Unit
    • How to Create and Edit a Workspace (Davicom Cortex series)
    • How to do a Factory Reset (Davicom Cortex 360)
    • What is a Workspace? (Davicom Cortex series)
  • Recent Articles
    • Davicom Cortex 320/360 Specifications
    • Gmail Security Changes on May 30th 2022
    • How to Add a Custom Alert Sound to Dav2You in Android devices*
    • How to Connect Physical I/O to the Davicom Cortex 320
    • How to Connect Your Unit to the Dav2You App
    • How to Install Extra NIO Cards into an Existing NEURO Unit
    • How to Set the Internal Jumpers and DIP Switches (Davicom Cortex 320)
    • How to Set the Internal Jumpers and DIP Switches (Davicom Cortex 360)
    • What is a Remote Management System?
  • Sensors
    • About the DVLD-1
    • Averaging Time & Distance Thresholds (DVLD-1)
    • Bidirectional RF Power Sensor Calibration (Technical Bulletin)
    • Connecting an ACPM-1 (WattNode) to a Davicom MEXM
    • DTPI Installation and Operation
    • DTPI Toolbox Configuration and Use
    • DVLC-1 Setup & Connection
    • DVLD-1 Application Note
    • How to Monitor Your Tower Light Status (DV-200)
    • Installation and Initial Configuration (DVLD-1)
    • Installation and Setup of the BPS1050/BPS5095 with a Davicom DV-200 Unit (TB-034)
    • S-TEMP Connection Procedure (Technical Bulletin)
    • Temperature Probe Interface (DTPI) Specifications
    • Timeout Delays (DVLD-1)
    • TS4085 Connection Procedure (Technical Bulletin)
    • Using the DVLD-1
  • Software
    • DavLink Communications Software
    • DavNet Alarms and Logs from Your Network of Remote Sites
    • DV-200 unit versus DavLink Software
    • How to Add a Custom Alert Sound to Dav2You in Android devices*
    • How to change the DavLink 6 default Workspace
    • How to Connect Your Unit to the Dav2You App
    • How to Control a Relay in DavLink Using a Mouse (DV-200)
    • How to Create a Custom Map in DavNet
    • How to Resize DavLink Workspaces (DV-200)
    • How to Send Alarms to More Than One DavNet
    • Installing DavLink Software and Davicom Firmware & Utilities
  • Workspaces
    • Davicom Cortex Panel (Tab) Properties Explained
    • Graphic edition menu explained (Davicom Cortex Series)
    • How to Assign a Specific Davicom Cortex Workspace to a User
    • How to change the DavLink 6 default Workspace
    • How to Create and Edit a Workspace (Davicom Cortex series)
    • How to Delete Workspaces from a Davicom Cortex
    • How to Load a Workspace (Davicom Cortex series)
    • How to Open and Merge Davicom Cortex Workspaces
    • How to Rename a Davicom Cortex Workspace Tab
    • How to rename Workspaces from within a Davicom Cortex
    • How to Resize DavLink Workspaces (DV-200)
    • How to Retrieve Workspaces from a Davicom Cortex
    • How to Save a Workspace (Davicom Cortex series)
    • How to upload a Workspace into a Davicom Cortex
    • Introduction to Davicom Cortex Meter Edition and Creation
    • Introduction to Workspace Creation, Edition and Saving (Davicom Cortex Series)
    • Quick Workspace Cheat-Sheet
    • What is a Workspace? (Davicom Cortex series)
    • What is the Difference Between the Workspace File and the Configuration File (Davicom Cortex series)
    • Why and How to Resize Davicom Cortex Workspaces
    • Workspaces Menu Explained (Davicom Cortex series)
Discover Davicom
Discover the Cortex Series

Davicom Cortex Series

  • Knowledge Base
  • Davicom Cortex Series

AC Power Fail Menu Explained (Davicom Cortex series)

Activating Software Options on Davicom Cortex 360/320 Units

Activity Monitoring Menu Explained (Davicom Cortex series)

Administration Menu Explained (Davicom Cortex series)

Alarm Call Lists Menu Explained (Davicom Cortex series)

Alarm Parameters Menu Explained (Davicom Cortex series)

Configuration and Programming Settings (Davicom Cortex series)

Connection and initial setup of MEXM devices with a Davicom Cortex unit

Connections List Explained (Davicom Cortex Series)

Creating limited-rights users with the Custom Level Editor

Custom Log Setup explained (Davicom Cortex Series)

Date, Time and Location Menu Explained (Davicom Cortex series)

Davicom Cortex 320 Factory Reset Procedure

Davicom Cortex 320 Firmware Upgrade and Rollback Procedures

Davicom Cortex 320 Rescue Procedure

Davicom Cortex 320/360 Specifications

Davicom Cortex 360 Factory Reset Procedure

Davicom Cortex 360 Firmware Upgrade and Rollback Procedures

Davicom Cortex 360 Rescue Procedure

Davicom Cortex 360 Specifications

  • 1
  • 2
  • 3
  • …
  • 5
  • Next
  • Warranty
  • Product Registration
  • Returns and RMA form
  • Privacy Policy
  • Customer Satisfaction Surveys
  • Davicom Product Website
  • About DEX
Facebook
YouTube
LinkedIn
Davicom, a division of Comlab Telecommunications Inc. All Rights Reserved.
    0

    $0.00

      ✕

      Login

      Lost your password?

      This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
      Privacy & Cookies Policy

      Privacy Overview

      This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are as essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
      Necessary
      Always Enabled
      Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
      Non-necessary
      Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
      Functional
      Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
      Performance
      Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
      Analytics
      Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.
      Advertisement
      Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.
      Others
      Other uncategorized cookies are those that are being analyzed and have not been classified into a category as yet.
      SAVE & ACCEPT
      Powered by CookieYes Logo

      Installation of DavLink 5.56.29025 requires a Microsoft Visual C++ 2010 Redistributable x86 32 bit package. If your PC does not already have it, you can get it below, or from Microsoft. Note that it is required to use the 32-bit version of the package even if the PC is running a 64-bit version of Windows, and it must also be installed before installing DavLink.

      Windows 10 users: The C++ Redistributable may already be installed on your computer. In this case, please install the version supplied here anyway.

      Download Microsoft 2010 Visual C++ Redistributable (x86, 32-bit)
      Go to top

       

      I’ve installed the C++ Redistributable file and I’m now ready to install Davlink.

      DavLink(14 MB)

      Installation of DavLink 6 requires a Microsoft Visual C++ 2010 Redistributable x86 32 bit package. If your PC does not already have it, you can get it below, or from Microsoft. Note that it is required to use the 32-bit version of the package even if the PC is running a 64-bit version of Windows, and it must also be installed before installing DavLink.

      Windows 10 users: The C++ Redistributable may already be installed on your computer. In this case, please install the version supplied here anyway.

      Download Microsoft 2010 Visual C++ Redistributable (x86, 32-bit)
      Go to top

       

      I’ve installed the C++ Redistributable file and I’m now ready to install Davlink.

      DavLink (112 MB)