| COMMAND | DESCRIPTION |
| 1x0Zyy# | Enable MEXM input |
| 2x0Zyy# | Disable input |
| 3x0Ryy# | Force-ON relay |
| 4x0Ryy# | Force-OFF relay |
| 5x0Ryy# | Release relay |
| 6x0Ryy# | Pulse relay |
| 7x0Zyy# | Input Reading |
MEXM specific Davicom DTMF telephone commands
Where x is the MEXM ID or the line number of the MEXM in Unit Configuration / Devices / Modbus Setup, Z is the type of input or output (A = Metering input, D = Status input, R = relay) and yy is the actual input / output number.
Installation of DavLink 5.56.29025 requires a Microsoft Visual C++ 2010 Redistributable x86 32 bit package. If your PC does not already have it, you can get it below, or from Microsoft. Note that it is required to use the 32-bit version of the package even if the PC is running a 64-bit version of Windows, and it must also be installed before installing DavLink.
Windows 10 users: The C++ Redistributable may already be installed on your computer. In this case, please install the version supplied here anyway.
I’ve installed the C++ Redistributable file and I’m now ready to install Davlink.
DavLink(14 MB)
Installation of DavLink 6 requires a Microsoft Visual C++ 2010 Redistributable x86 32 bit package. If your PC does not already have it, you can get it below, or from Microsoft. Note that it is required to use the 32-bit version of the package even if the PC is running a 64-bit version of Windows, and it must also be installed before installing DavLink.
Windows 10 users: The C++ Redistributable may already be installed on your computer. In this case, please install the version supplied here anyway.
I’ve installed the C++ Redistributable file and I’m now ready to install Davlink.
DavLink (112 MB)
