June 17, 2024
This has happened before when a remote site’s phone number was placed on a suspected “Spam Caller” list. Please check with your provider. Contact us for […]
FAQ specific to the DV-200, 2nd generation of Davicom RTUs
May 21, 2024
If all the front panel LEDs are lit up and the Pause and Local are blinking, this could indicate a bricked unit. Verify with a manual […]
May 21, 2024
If unable to connect via the front port after a reboot or power cycle, try disconnecting and reconnecting the USB cable to reestablish the Comm Port […]
May 21, 2024
One way to correct this is with a manual factory reset: step 13 of the 5.56d firmware upgrade document. Click below to see more. https://dex.davicom.com/wp-content/uploads/2023/04/Davicom_Version_556d_Upgrade.pdf
May 21, 2024
A configuration can be lost after a reboot or power cycle if the RAM battery voltage is too low. A low voltage flag can be used. […]
June 17, 2019
The table below is for the Davicom Cortex Series. Username Password Level direc01 mocivad9 Director super01 ssssssss Supervisor admin01 aaaaaaaa Administrator oper01 oooooooo Operator viewer01 vvvvvvvv […]
June 14, 2019
Connecting locally to a Davicom Cortex 360 In order to connect to the Davicom Cortex 360 through the local USB port, via telephone or over a […]
June 13, 2019
Visit the Software & Firmware page.
June 13, 2019
How to connect to a Davicom Cortex 360 Communications with Davicom’s Cortex 360 for configuration and control can be achieved via an Ethernet connection or over […]
