How do I connect “locally” to a Davicom?

Connecting locally to a Davicom Cortex 360

In order to connect to the Davicom Cortex 360 through the local USB port, via telephone or over a narrowband radio or serial link, DavLink 6 is required. For the USB connection, Davicom’s USB driver is also required. It is included on the installation CD or it can also be found on the Software & Firmware page. Once you have installed the USB driver, please connect your computer to the Davicom Cortex’s front-panel USB port and then start DavLink. Once started, DavLink will display its main screen. Go to the upper left of this screen to see…

Connecting locally to a DV-200

If you are using your computer’s USB port, you will need a Type A/B USB device cable (version 1.1 or above). If you are using your computer serial port, you will need a male-female 9-pin serial cable (not a null-modem cable)…