July 1, 2025
You can use a Let’s Encrypt security certificate™ in a Davicom Cortex unit to increase security and eliminate browser warnings on connection.
An Archive of the Andrew’s Advice feature.
June 23, 2025
To assign a “Local Mode Relay” to a “Do Not Go Home” indicator, go to the Alarm Parameters section and enter the Davicom Cortex physical relay […]
June 16, 2025
In the Alarm Parameters section, select the “Enable Audible Alarm” checkbox to obtain the “whoop-whoop” sound when an alarm occurs in the Davicom Cortex.
June 8, 2025
In the Alarm Parameters section, select the Enable IP Stay-Connected on No ACK option, and you will not be disconnected when an alarm pop-up occurs.
June 2, 2025
You can reduce the amount of information that the unit will “speak” by going to the Alarm Parameters section and unchecking the Voice alarms options you […]
May 26, 2025
You can configure the Davicom to Enable Alarm Calls automatically using a self-SET at IP address 127.0.0.1 to enable the alarmCallSequence (OID .1.3.6.1.4.1.14665.1.1.2.19.0).
May 20, 2025
Only users with Supervisor or Director level access can take control of a unit remotely and cancel “Local” mode. This is a safety feature to ensure […]
May 12, 2025
A Davicom unit can be in “Local” mode because someone pressed the “Local” button on the unit at the site or because a Supervisor put the […]
May 5, 2025
“Pause” mode may be remotely canceled by a user with Administrator or higher access level. This is a safety feature to ensure that local technicians can […]
