1 – Time in seconds before the Davicom Cortex starts going through the alarm call list when an alarm is detected.
2 – Time in seconds between the calls to each item on the list.
3 – Time in minutes before the Davicom Cortex restarts the alarm call list. This only applies if “Do List Once” is unchecked.
4 – Maximum number of times the Davicom Cortex goes through the alarm call list. This only applies if “Do List Once” is unchecked.
5– Maximum duration in seconds that the ACK pop-up will appear.
6– Select this checkbox to stay connected when an alarm pop-up occurs.
7– Select this checkbox to transmit alarm to DavNet even if previously acknowledged.
8– Select this checkbox to transmit alarm to email even if previously acknowledged.
9– Select this checkbox to transmit SNMP TRAP alarm even if previously acknowledged.
10– Select this checkbox to enable an audible alarm sound when an alarm occurs.
11 – Action Type when the Pause button is pressed.
12 – Action Type when the Local button is pressed.
13– Relay to assign to when the Davicom Cortex is in Local Mode.
14– Select this checkbox to have the preamble “spoken” by the Davicom Cortex during Voice Alarms.
15– Select this checkbox to have the Action type “spoken” by the Davicom Cortex during Voice Alarms.
16– Select this checkbox to have the I/O “spoken” by the Davicom Cortex during Voice Alarms.
17– This checkbox only applies when alarms are sent via the local audio output to a speaker or two-way radio mic input.
