September 16, 2024
There are two methods possible, using the system menu or the unit’s front panel. Detailed procedures can be found at the link below.
FAQ specific to the Cortex, 3rd generation of Davicom RTUs
September 9, 2024
This is a simple procedure using the unit’s front panel. Two methods are possible, detailed in the procedure found at the link below.
September 3, 2024
This is a simple procedure thanks to the Davicom Cortex 360’s OLED screen. Two methods are possible, detailed in the procedure found at the link below.
August 26, 2024
It’s as simple as powering up your unit after inserting a USB drive with the firmware image file. Please fully read the appropriate document linked before […]
August 19, 2024
The MIOP300 IO terminal block requires that the A- input is tied to ground for proper measurements.
July 29, 2024
When receiving a Major alarm call from your Davicom Cortex, simply press 77# on your phone’s keypad. Then simply follow the instructions given by your unit.
July 24, 2024
Both modes inhibit automations. Local mode also locks out control by remote users to ensure personnel safety during site maintenance but permits local connection and relay […]
July 15, 2024
The 1Y1 Flag can be used along with the Davicom CORTEX Series’ Virtual Logic Gates to send an alert after a failed synchronization with the NTP […]
July 2, 2024
It’s best practice to copy and paste DavLink License Keys to avoid erroneous manual entry. An incorrectly entered key could be the reason for these messages. […]
